Flash File Huawei Y6 Pro

Here you can download flash file for Huawei Y6 Pro Android Phone. You can download and install the latest and original stock ROM (Firmware) for free. Also, flash tools available to flash your mobile.

Flashing stock firmware will permanently delete your device data. So backup all personal data like photos, contacts, and apps, etc to prevent data loss.

 

 

What is Android Flashing?

Android Flashing means removing stock firmware (Software) from android device and replace with same version or any other version. Simply, flashing means changing the operating system. You can flash your device with Recovery mode or Flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues and improve device performance. Flashing delete all your device data like photos, contacts, and apps, etc.

 

 

Flashing with Recovery Mode

You don’t need any flash tool or Computer or any other USB drivers to flash the firmware of Huawei Y6 Pro with this method. You need just a flash file.

Follow these steps to flash stock firmware with recovery mode.

Method 1

  • First, download the flash file.
  • Next, Move the Firmware file to SD card storage (Do not put the file in the folder).
  • Remove SD card from the phone.
  • Turn off your Huawei Honor Mobile.
  • Next, Press and Hold Volume Down + Power Button [Volume Up + Power Button].
  • Release both buttons when you see LOGO appears on your screen.
  • After that, select wipe data/factory reset option, Using Volume Buttons and confirm with Power button.

Hard Reset - wipe data option

  • Now select option wipe data/factory reset, Using Volume Buttons and confirm with Power button.

Hard Reset - Wipe data 2 Option

  • Finally Select reboot system now option.
  • Now insert the sd card. And again go to the recovery mode.
  • Now Locate Downloaded Firmware file from Storage.

 

 

Firmware Update file option

  • After that, Tap on the Firmware Update file and install it.
  • You have successfully flash the Firmware.

 

Method 2

  • First, download the flash file.
  • Next, Move the Firmware file to SD card storage (Do not put the file in the folder).
  • Remove SD card from the phone.
  • Power off your Huawei Y6 Pro, by holding the power button.
  • Next, Press and Hold Volume Down + Power Button [Volume Up + Power Button].
  • After that, Release both Buttons when you see Android exclamation mark appears.
  • Next, While holding down the Power button press and release Volume Up Button.
  • Navigate with Volume Buttons to select wipe data/factory reset option and press the Power Button.

Hard Reset - Wipe data/factory Reset option

  • Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
  • Finally, select the reboot system now option.
  • Now insert the sd card. And again go to the recovery mode.
  • Then select Apply update from SD card option.
  • Now Locate Downloaded Firmware file from Storage.
  • After that, Tap on the Firmware file and install it.
  • You have successfully flash the Firmware.

 

 

Download Huawei Y6 Pro Flash File

This flash file helps you to upgrade or downgrade the firmware of your Huawei Y6 Pro Android phone. Stock firmware fix software related issues, IMEI related issues, improve performance and boot loop issues, etc.

Here you can download the latest and original version of stock firmware (Flash File) for your Huawei Y6 Pro mobile.

 

Download Huawei Y6 Pro flash file

 

 

Flashing with Flash Tool

You need Computer, flash tool, flash file, USB drivers, and USB cable to flash with this method. All data will be deleted after flashing, so backup all personal data like photos and contacts, etc to prevent data loss.

Follow these steps to flash your Huawei Y6 Pro Android phone with flash tool.

  1. First download the flash file, flash tool, and USB drivers on your PC.
  2. Then, Install the USB drivers for your Android phone.
  3. Next, launch Flash tool on your computer.
  4. Then, switch off your Honor mobile.
  5. Next, press and hold volume up + power button.
  6. After that, Connect your Huawei Y6 Pro phone to the computer with a USB cable.
  7. Then, browse the flash file in the flash tool and click on the download button.
  8. Now flashing start on your phone.
  9. Flashing takes 10 to 15 minutes. Please wait until flashing completed.
  10. After flashing completed, Your device automatically rebooted.
  11. Flashing done on your mobile.
  12. Finally, remove the phone from the PC.

Note: Flash tool download link available below.

 

 

Download Flash Tool

Here you can download the best Android Flash Tools of Huawei Y6 Pro phone for free. You can flash the firmware (Stock ROM) with these flash tools.

Check out below link to download the Flash tools.

 

Download Flash Tools

 

 

Download USB Drivers

Here you can Download and install Huawei Y6 Pro mobile device USB (Universal Serial Bus) drivers for free. We provide official links for original equipment manufacturers sites.

Check out below link to download the USB drivers.

Download USB Drivers

 

 

Leave a Reply