Gigabyte Flash File – List

Here you can download flash file for Gigabyte Android Phone. You can download and install the latest and original stock ROM (Firmware) for free. Also, flash tools available to flash your mobile.

Flashing stock firmware will permanently delete your device data. So backup all personal data like photos, contacts, and apps, etc to prevent data loss.

 

 

What is Android Flashing?

Android Flashing means removing stock firmware (Software) from android device and replace with same version or any other version. Simply, flashing means changing the operating system. You can flash your device with Recovery mode or Flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues and improve device performance. Flashing delete all your device data like photos, contacts, and apps, etc.

 

 

Gigabyte Phones List

Select your mobile below to download the latest Gigabyte flash file for your phone. All Gigabyte phone list available here.

  1. Gigabyte Aku A1
  2. Gigabyte Alto A2
  3. Gigabyte G1345
  4. Gigabyte GSmart Akta A4
  5. Gigabyte GSmart Arty A3
  6. Gigabyte GSmart Classic
  7. Gigabyte GSmart Classic Joy
  8. Gigabyte GSmart Classic Lite
  9. Gigabyte GSmart Classic LTE
  10. Gigabyte GSmart Classic Pro
  11. Gigabyte GSmart Elite
  12. Gigabyte GSmart Essence
  13. Gigabyte GSmart Essence 4
  14. Gigabyte GSmart G1305
  15. Gigabyte GSmart G1310
  16. Gigabyte GSmart G13105
  17. Gigabyte GSmart G1315
  18. Gigabyte GSmart G13155
  19. Gigabyte GSmart G1342
  20. Gigabyte GSmart G13425
  21. Gigabyte GSmart G1355
  22. Gigabyte GSmart G1362
  23. Gigabyte GSmart GS202
  24. Gigabyte GSmart Guru
  25. Gigabyte GSmart Guru G1
  26. Gigabyte GSmart Guru GX
  27. Gigabyte GSmart GX2
  28. Gigabyte GSmart M1320
  29. Gigabyte GSmart M1320X
  30. Gigabyte GSmart M1420
  31. Gigabyte GSmart M1420X
  32. Gigabyte GSmart Maya M1
  33. Gigabyte GSmart Maya M1X
  34. Gigabyte GSmart Maya M1 v2
  35. Gigabyte GSmart Maya M1 v2X
  36. Gigabyte GSmart Mika M2
  37. Gigabyte GSmart Mika M2X
  38. Gigabyte GSmart Mika M3
  39. Gigabyte GSmart Mika M3X
  40. Gigabyte GSmart Mika MX
  41. Gigabyte GSmart Rio R1
  42. Gigabyte GSmart Rola
  43. Gigabyte GSmart Roma R2
  44. Gigabyte GSmart Roma R2 Plus Edition
  45. Gigabyte GSmart Roma RX
  46. Gigabyte GSmart Saga S3
  47. Gigabyte GSmart Sierra S1
  48. Gigabyte GSmart Simba SX1
  49. Gigabyte GSmart T4
  50. Gigabyte GSmart T4 LE
  51. Gigabyte Orange Fova
  52. Gigabyte Orange San Diego
  53. Gigabyte Orange Santa Clara
  54. Gigabyte Rey R3
  55. Gigabyte Tuku T2

 

 

 

Flashing Gigabyte with Recovery Mode

You don’t need any flash tool or Computer or any other USB drivers to flash the firmware of Gigabyte with this method. You need just a flash file.

 

This process will erase all your Mobile data like

  • Google and other accounts
  • Downloaded Apps
  • Media files (Photos, Videos, and Music files)
  • Contacts
  • System and app data
  • App settings

 

Method – 1

This method deletes all your device data. So backup all data like photos, contacts and any other personal files, etc before flashing your phone. If you don’t understand recovery mode, please exit from it and contact the nearest customer support center.

  • Download the Firmware file and move to SD Card storage.
  • Then remove the SD card.
  • Power off your Gigabyte Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button [Volume Down + Power Button].
  • Release all buttons when you see Boot Mode appears on your screen.
  • Then choose the Recovery option, by using to navigate Volume Buttons and to confirm Power Button.
  • Next, You will see Android exclamation mark.
  • While holding down the Power button press and release Volume Up Button.
  • Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button.

Hard Reset - Wipe data/factory Reset option

  • Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
  • Finally Select reboot system now option.
  • Now, insert the SD card.
  • Next, Firmware file must be in main storage {Do not put the file in the folder}, Like its below.

 

Firmware Update file option

  • Now Locate Downloaded Firmware file from Storage.
  • After that, Tap on the Firmware file and install it.
  • You have successfully updated your phone Firmware.

 

Method – 2

This method deletes all your device data. So backup all data like photos, contacts and any other personal files, etc before flashing your phone. If you don’t understand recovery mode, please exit from it and contact the nearest customer support center.

  • Download the Firmware file and move to SD Card storage.
  • Then remove the SD card.
  • Power off your Gigabyte Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button [Volume Down + Power Button].
  • Release all buttons when you see Boot Mode appears on your screen.
  • Then choose the Recovery option, by using to navigate Volume Buttons and to confirm Power Button.
  • Next, You will see Android exclamation mark.
  • While holding down the Power button press and release Volume Up Button.
  • Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button.
  • Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
  • Finally Select reboot system now option.
  • After wiping completed, insert SD card.
  • Now again go to recovery mode and Choose option Apply update from SD.
  • In this step, Locate Downloaded Firmware file from Storage.
  • Tap on the Firmware file and install it.
  • You have successfully updated your phone Firmware.

 

 

 

How to Exit Recovery Mode

You must exit from recovery mode if you stuck at any operation or don’t understand recovery. Follow these steps to come out from recovery.

  • After you enter the Recovery Mode menu.
  • Now choose option Reboot, using Volume buttons and press the Power button to confirm.
  • After that, Your device will be rebooted automatically.
  • You have successfully exited Recovery mode.

Note: You can also exit recovery mode by pressing the power button for a while.

 

 

Flashing Gigabyte with Flash Tool

You need Computer, flash tool, flash file, USB drivers, and USB cable to flash with this method. All data will be deleted after flashing, so backup all personal data like photos and contacts, etc to prevent data loss.

Follow these steps to flash your Gigabyte Android phone with flash tool.

  1. First download the Gigabyte flash file, flash tool, and USB drivers on your PC.
  2. Then, Install the USB drivers for your Android phone.
  3. Next, launch Flash tool on your computer.
  4. Then, switch off your Gigabyte mobile.
  5. Next, press and hold
    1. Volume Up + Power Button {or}
    2. Volume Down + Power Button
  6. After that, Connect your Gigabyte phone to the computer with a USB cable.
  7. Then, browse the flash file in the flash tool and click on the download button.
  8. Now flashing start on your phone.
  9. Flashing takes 10 to 15 minutes. Please wait until flashing completed.
  10. After flashing completed, Your device automatically rebooted.
  11. Flashing done on your mobile.
  12. Finally, remove the phone from the PC.

 

 

Leave a Reply