Wiko Flash File – List

Here you can download flash file for Wiko Android Phone. You can download and install the latest and original stock ROM (Firmware) for free. Also, flash tools available to flash your mobile.

Flashing stock firmware will permanently delete your device data. So backup all personal data like photos, contacts, and apps, etc to prevent data loss.

 

 

What is Android Flashing?

Android Flashing means removing stock firmware (Software) from android device and replace with same version or any other version. Simply, flashing means changing the operating system. You can flash your device with Recovery mode or Flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues and improve device performance. Flashing delete all your device data like photos, contacts, and apps, etc.

 

 

Wiko Phones List

Select your mobile below to download the latest Wiko flash file for your phone. All Wiko phone list available here.

  1. Wiko Sunny3
  2. Wiko View3 Pro
  3. Wiko View3
  4. Wiko View2 Go
  5. Wiko View2 Plus
  6. Wiko View Max
  7. Wiko View2 Pro
  8. Wiko View2
  9. Wiko View Prime
  10. Wiko View XL
  11. Wiko View
  12. Wiko WIM
  13. Wiko WIM Lite
  14. Wiko Upulse
  15. Wiko Upulse lite
  16. Wiko Tommy2 Plus
  17. Wiko Tommy2
  18. Wiko Harry
  19. Wiko Jerry2
  20. Wiko B-Kool
  21. Wiko Barry
  22. Wiko Birdy 4G
  23. Wiko Bloom
  24. Wiko Bloom2
  25. Wiko Cink Five
  26. Wiko Cink King
  27. Wiko Cink Peax
  28. Wiko Cink Peax 2
  29. Wiko Cink Slim
  30. Wiko Cink Slim 2
  31. Wiko Cink Plus
  32. Wiko Darkfull
  33. Wiko Darkmoon
  34. Wiko Darknight
  35. Wiko Darkside
  36. Wiko Fever 4G
  37. Wiko Fever Special Edition
  38. Wiko Fizz
  39. Wiko Freddy
  40. Wiko Getaway
  41. Wiko Goa
  42. Wiko Highway
  43. Wiko Highway 4G
  44. Wiko Highway Pure 4G
  45. Wiko Highway Signs
  46. Wiko Highway Star 4G
  47. Wiko Iggy
  48. Wiko Jerry
  49. Wiko Jimmy
  50. Wiko K-Kool
  51. Wiko Kite 4G
  52. Wiko Lenny
  53. Wiko Lenny 2
  54. Wiko Lenny 3
  55. Wiko Ozzy
  56. Wiko Pulp
  57. Wiko Pulp 4G
  58. Wiko Pulp Fab 4G
  59. Wiko Rainbow
  60. Wiko Rainbow 4G
  61. Wiko Rainbow Jam
  62. Wiko Rainbow Jam 4G
  63. Wiko Rainbow Lite
  64. Wiko Rainbow Lite 4G
  65. Wiko Rainbow Up
  66. Wiko Rainbow Up 4G
  67. Wiko Ridge
  68. Wiko Ridge 4G
  69. Wiko Ridge Fab 4G
  70. Wiko Robby
  71. Wiko S-Kool
  72. Wiko Selfy
  73. Wiko Selfy 4G
  74. Wiko Slide
  75. Wiko Slide 2
  76. Wiko Stairway
  77. Wiko Sublim
  78. Wiko Sunny
  79. Wiko Sunset
  80. Wiko Sunset2
  81. Wiko Tommy
  82. Wiko U Feel
  83. Wiko U Feel Fab
  84. Wiko U Feel Lite
  85. Wiko U Feel Prime
  86. Wiko Wax

 

Flashing Wiko with Recovery Mode

You don’t need any flash tool or Computer or any other USB drivers to flash the firmware of Wiko with this method. You need just a flash file.

 

This process will erase all your Mobile data like

  • Google and other accounts
  • Downloaded Apps
  • Media files (Photos, Videos, and Music files)
  • Contacts
  • System and app data
  • App settings

 

Method – 1

This method deletes all your device data. So backup all data like photos, contacts and any other personal files, etc before flashing your phone. If you don’t understand recovery mode, please exit from it and contact the nearest customer support center.

  • Download the Firmware file and move to SD Card storage.
  • Then remove the SD card.
  • Power off your Wiko Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button [Volume Down + Power Button].
  • After that, Release both Buttons when you see LOGO appears.
  • Next, You will see Android exclamation mark.
  • While holding down the Power button press and release Volume Up Button.
  • Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button.

Hard Reset - Wipe data/factory Reset option

  • Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
  • Finally Select reboot system now option.
  • Now, insert the SD card.
  • Next, Firmware file must be in main storage {Do not put the file in the folder}, Like its below.

 

Firmware Update file option

  • Now Locate Downloaded Firmware file from Storage.
  • After that, Tap on the Firmware file and install it.
  • You have successfully updated your phone Firmware.

 

Method – 2

This method deletes all your device data. So backup all data like photos, contacts and any other personal files, etc before flashing your phone. If you don’t understand recovery mode, please exit from it and contact the nearest customer support center.

  • Download the Firmware file and move to SD Card storage.
  • Then remove the SD card.
  • Power off your Wiko Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button [Volume Down + Power Button].
  • After that, Release both Buttons when you see LOGO appears.
  • Next, You will see Android exclamation mark.
  • While holding down the Power button press and release Volume Up Button.
  • Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button.
  • Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
  • Finally Select reboot system now option.
  • After wiping completed, insert SD card.
  • Now again go to recovery mode and Choose option Apply update from SD.
  • In this step, Locate Downloaded Firmware file from Storage.
  • Tap on the Firmware file and install it.
  • You have successfully updated your phone Firmware.

 

 

 

How to Exit Recovery Mode

You must exit from recovery mode if you stuck at any operation or don’t understand recovery. Follow these steps to come out from recovery.

  • After you enter the Recovery Mode menu.
  • Now choose option Reboot, using Volume buttons and press the Power button to confirm.
  • After that, Your device will be rebooted automatically.
  • You have successfully exited Recovery mode.

Note: You can also exit recovery mode by pressing the power button for a while.

 

 

Flashing Wiko with Flash Tool

You need Computer, flash tool, flash file, USB drivers, and USB cable to flash with this method. All data will be deleted after flashing, so backup all personal data like photos and contacts, etc to prevent data loss.

Follow these steps to flash your Wiko Android phone with flash tool.

  1. First download the Wiko flash file, flash tool, and USB drivers on your PC.
  2. Then, Install the USB drivers for your Android phone.
  3. Next, launch Flash tool on your computer.
  4. Then, switch off your Wiko mobile.
  5. Next, press and hold
    1. Volume Up + Power Button {or}
    2. Volume Down + Power Button
  6. After that, Connect your Wiko phone to the computer with a USB cable.
  7. Then, browse the flash file in the flash tool and click on the download button.
  8. Now flashing start on your phone.
  9. Flashing takes 10 to 15 minutes. Please wait until flashing completed.
  10. After flashing completed, Your device automatically rebooted.
  11. Flashing done on your mobile.
  12. Finally, remove the phone from the PC.

 

 

Leave a Reply